Pipe Shoes
Application
Pipe Shoe with insulation
With PUR insulation insert for pipes on suitable surfaces. Height-adjustable in steps of 2.5 mm. When resting on steel beams, a minimum flange width of 80 mm is recommended.
Scope of delivery
Upper and lower part are bolted together allowing height adjustment. The slide plate is fixed to the lower part. Pipe Clamp, load spread metal sheet and insulation insert are pre-assembled.
Technical Data
| NB | Form | Height H as delivered [mm] | Height H range [mm] |
|---|---|---|---|
| DN 25 - 50 | Single clamp | 150 | 137.5 ... 167.5 |
| DN 65 - 80 | Single clamp | 150 | 147.5 ... 177.5 |
| DN 100 - 250 | Double clamp | 150 | 150 ... 180 |
| DN 300 | Double clamp | 150 | 150 ... 160 |
Tightening torque screw connections:
| Clamping bolts | tightening torque [Nm] | height adjustment | tightening torque [Nm] |
|---|---|---|---|
| DN 25 - 80 | 25 | bolts in the bar | 80 |
| DN 100 - 300 | 30 | bolts in the bar | 80 |
Insulation thickness:
| NB | insulation thickness [mm] |
|---|---|
| DN 25 - 50 | 50 |
| DN 65 - 250 | 60 |
| DN 300 | 80 |
The Installation instructions of the DIN 4140 must be observed (adv. existing Columns are with Sealing paste to close).
Processing information:
If pipe tolerances cause a gap it is necessary to use a sealant.
| Dimensions: | |
| Metal plate: | L = 250 mm x B = 100 mm |
| Slide plate incl.: | L = 256 mm x B = 105 mm |
| Material: | |
| Metal parts: | Steel, HCP |
| Grub screws, nuts: | Steel, HCP |
| Slide plate: | Polyamide 6.0, glass fibre reinforced, black |
| Insulation insert: | PUR, 200 kg/m 3 |
| Load spread sheet | Steel 1.0350, pre-galvanised according to DIN EN 10346 |
| Temperature range insulation: | -70°C to +120°C |
| Temperature range sliding plate: | -20°C to +130°C |
| Media temperature: | Realizable media temperatures are to be calculated individually to avoid possible condensation. |
Approvals / Compliance
| Type | D (pipe) [mm] |
W [kg] |
Quantity [pack] |
Part- No. |
|---|---|---|---|---|
| LK - HV 150 DN 25 | 33.7 | 4.1 | 1 | 110110 |
| LK - HV 150 DN 32 | 42.4 | 4.2 | 1 | 110111 |
| LK - HV 150 DN 40 | 48.3 | 4.3 | 1 | 110112 |
| LK - HV 150 DN 50 | 60.3 | 4.4 | 1 | 110113 |
| LK - HV 150 DN 65 | 76.1 | 6.2 | 1 | 110114 |
| LK - HV 150 DN 80 | 88.9 | 6.6 | 1 | 110115 |
| LK - HV 150 DN 100 | 114.3 | 12.0 | 1 | 110116 |
| LK - HV 150 DN 125 | 139.7 | 13.9 | 1 | 110117 |
| LK - HV 150 DN 150 | 168.3 | 14.5 | 1 | 110118 |
| LK - HV 150 DN 200 | 219.1 | 16.6 | 1 | 110119 |
| LK - HV 150 DN 250 | 273.0 | 18.6 | 1 | 110120 |
| LK - HV 150 DN 300 | 323.9 | 24.2 | 1 | 110121 |